AIR (COMPRESSED)
Air is filtered dried and compressed into industrial cylinders at high pressure. It is supplied as two products.
Natural dry air has all of the nominal components of natural air in their “natural” concentrations including carbon dioxide however, the pre-compression stage removes moisture from the air to a very low level (< 10 ppm).
Synthetic air is a combination of purified oxygen and nitrogen gas blended to the ratio of compressed air. This gas mixture does not therefore contain the same ratios of other major and minor components present in natural compressed air.
Our compressed air and synthetic air, although safe, is not intended for human consumption or for the support of life.
COMMON USES
– Pneumatics, Air Tools
– Energy Storage
– Injection molding
– Laboratory
GAS SPECIFICATION
IMPURITIES
CYLINDER SIZE, WEIGHT
DIMENSIONS (H x D) mm
FILL PRESSURE
OUTLET FITTING
Dry Air
Moisture Content: < 5ppm
Carbon Monoxide: < 3ppm
Carbon Dioxide: < 3ppm
Total Hydrocarbons: < 5ppm
D, 2.0 m3, 15.5 kg
F 4.2 m3, 40 kg
G 9.5 m3, 70 kg
D (560 x 159)
F (800 x 235)
G (950 x 250)
Nominal Pressure @ 15C
20,000 kPa
Filled by weight
Type 60
W 27x2 RH
Synthetic Air
19.5 - 22% Oxygen
Balance Nitrogen
Moisture Content: < 5ppm
Carbon Monoxide: < 3ppm
Carbon Dioxide: < 3ppm
Total Hydrocarbons: < 5ppm
D, 2.0 m3, 15.5 kg
F 4.2 m3, 40 kg
G 9.5 m3, 70 kg
D (560 x 159)
F (800 x 235)
G (950 x 250)
Nominal Pressure @ 15C
20,000 kPa
Filled by weight
Type 60
W 27x2 RH