HOSPITALITY GAS REGULATORS

Designed for the delivery of pure and mixed gases for dispensing beer, wine and softdrinks.

HOSPITALITY REGULATOR MODELS AVAILABLE:

MODEL 802

Designed for carbon dioxide gas delivery for bars and pubs. It is also suitable for carbon dioxide / nitrogen gas mixtures.

Features include:

– Excellent flow

– Outlet pressure 0-400 or 0-800 kPa

– Forged brass body

– Standard Harris parts

– Safety relief valve, user cleanable

– Outlet fitting with built-in non-return valve to avoid internal liquid contamination

– Safety pressure gauges calibrated in kPa

– Lock nut on pressure adjustment

– Ability to expand to multiple regulators from one cylinder source

802R400CD Single CO2 regulator (beer)

802R800CD Single CO2 regulator (postmix)

802R400CD/2 Double CO2 regulator

802R800CD/2 Double CO2 regulator

802R400CD/3 Triple CO2 regulator

38A957 Special outlet fitting, brass

MODEL 821

This regulator has been developed with direct input from customer within the hospitaltiy industry.

Features include:      Weight 1.3kg

– Proven capsule seat design

– Large 63mm easy to read safety back gauges

– Internal self reseating tamper proof safety releif valve

– Accurate regulation

– Easy to clean and maintain

821Z029 CO2 0-400 kPa rear inlet two filters

821Z035 CO2 (T30 Inlet) 0-400 kPa rear inlet, twin gauge, two filters, cylinder reg

821Z041 Nitrogen (T50 Inlet) 0-400 kPa, rear inlet, twin gauge, two filters, cylinder reg

MODEL 847

The performance of this regulator will provide an improved beer distribution system for the hospitality industry. Multi stage regulator suited for high flow where constant pressure is required.

Features include:

– Very large diaphram

– Large gas flow rates of 32000 l/hr at 5000 kPa

– Large diameter gauges

– Forged high quality brass

– Suit CO2 pipeline distribution setup

– Built in tamper proof safety relief valve

– Sav ‘T’ lock adjustment key

– Reduces surge when opening beer tap

847DT400CD CO2 rear inlet 0-400 kPa

847DT800CD CO2 rear inlet 0-800 kPa

MODEL 601

Many regulators on the market are rebranded oxygen regulators. Harris engineered these regulators specifically for the demanding use with helium gas. Helium is light and very expensive and required the correct regulator.

Features include: Weight (0.8 kg)

– Forged brass body and bonnet

– High pressure helium seat

– Internal safety device on the diaphram

– Fixed outlet pressure of 30 psi

– Spring loaded tilt valve for easy operation

 

MODEL 601

Designed for the dispensing of beer that does not require high flow rates e.g. homebrew or party hire.

Features include: Weight (0.8 kg)

– Metal case gauges

– Manufactured to ISO9002

– Brass body and bonnet

– Smooth pressure adjustment 0-400 kPa

– Internal safety reseating relief valve

– Special threads/seating to reduce the risk of leaks

HARRIS INDUSTRIAL GAS REGULATOR FULL CATALOGUE

Open the latest Catalogue from Harris. This is a comprehensive document that incluses gas cutting, brazing and flow control regulators.